ACM/AEM Solution

Curing System Additive

  • SPAM HC
  • SPAM DS
  • SPAM 4MPA
  • SPAM DA
  • SPAM PAFA-f/g
  • SPAM 18D
    • Product Indentity
    • Product NameSPAM 18D
    • Chemical NameOctadecylamine
    • CAS NO.124-30-1
    • Chemical Formula
    • Related WordsRubber release agent 18D; Armeen 18D;FENTAMINE A18; Internal release agent
    Product Introduction
    1. Used as internal release agent in the HDC curing system of ethylene acrylate copolymer, and the normal dosage is 0.5phr. Increasing SPAM 18D can result in improvement in scorch safety, slight reduction in cure rate and cure state. Compression set and tensile strength will be negatively influenced but these properties are normally recovered after post-cure.
    2.  If SPAM 18D is used as retarder to improve scorch safety, the recommendation is to add 0.25phr increments.
    3. It can bring vulcanizate with better properties after heat aging.
    Applications
    As the intermediate of organic synthesis,used in the production season octadecane amine salt and various additives.
    As internal release agent in the curing system of ethylene acrylate copolymer.
    SpecificationStandard